LEATHER GOODS


NEW ENGLISH SLINGS

  Our new British buckle slings have finally arrived! The waxed leather rifle sling with brass buckle was often found as part of the accoutrements set for the P-1853 Enfield, along with the bayonet frog and scabbard (also available). We are sometimes asked to stamp S. Isaac, Campbell & Co. on our leather Enfield slings but to date no original British rifle slings have been found so-marked. We have seen more than a few fakes--you can tell because those often have the name or the address misspelled! Until a verified original British Enfield rifle sling with US Civil War provenance is found marked S.IC& Co, we will continue to leave ours unmarked. This fine sling is a great addition to any P53 Enfield, but especially for your Todd Watts de-farbed Enfield, both London and Birmingham varients. The sling drawing (right) of an original British rifle sling.Our sling is faithfully reproduced from these drawings right down to the identical brass buckle.

NEW ENGLSIH SLING WITH BUCKLE# 2077-A $29.95 BUY NOW!



SINEW-ISH THREAD, CREAM & BROWN



  This is not genuine sinew thread but I do not know how else to discribe it. If you have something heavy to sew like leather or canvas. This will do the trick. It comes in a spool as seen in the photo and the photo is just about actual size. The photo does show the color a little lighter than it actually is. I do not know how many yards of thread are on the spool but it should last the average "diy" guy for a long time. It appears to be waxed as well.

SINEW THREAD CREAM COLOR
#2633     $4.95
BUY NOW!

SINEW THREAD BROWN COLOR
#2634-A     $4.95
BUY NOW!



BUFF LEATHER


  Buff leather cartridge box slings and belts. Very good quality leather. All Regulars and Marines wore buff leather up through mid 1855. Secretary of War Jeff Davis just couldn't imagine wearing white after Labor Day so he changed the Reg.s to black leather. The cartridge box sling is the standard size, 72 inches long. The waist belt is 55 inches long, you cut it to length. The holes are already punched for the buckle.

BUFF LEATHER CARTRIDGE BOX SLING
ITEM #19-W $29.95
BUY NOW!

BUFF LEATHER WAIST BELT
ITEM #17-W $21.95
BUY NOW!





  Here's something you don't get to see everyday. It's a CS cartridge box and canvas sling with leather tabs. It's the first one I've seen for sale in a while. Rafael Eledge, owner of Shiloh Relics and of "Antique Road Show" fame, was kind enough to let me display these images here so that you might enjoy them. He would also be happy to sell you this set. You can find the link to Shiloh Relics on our links page. For a mere $4250.00 you have this set hung up on the wall in your living room, I'm sure your wife won't mind.
  Thanks for sharing your photos Rafael.



  You knew all the time that I had an alterior motive didn't you. As you can see in the photo above we are now offering CS style canvas cartridge box slings. The one in the photo is the untarred version which has some decorative stitching. We also offer the plain, tarred black version as you see in the photo of the original above. Both are very popular and both are very Confederate.

CS (WHITE) CANVAS CARTRIDGE BOX SLING
# 19-C $14.95 BUY NOW!

CS (BLACK) CANVAS CARTRIDGE BOX SLING
# 19-D $14.95 BUY NOW!

11-1-16

HOW TO INSTALL A CARTRIDGE BOX SLING.

CARTRIDGE BOX SLING VIDEO



LEATHER BELT KEEPERS

  Our leather belt keepers are made from top quality cow hide. They are "edged" and stitched by some of the best craftsmen in the business. They are 1/2 inch wide. If you've ever tried to sew one of these you know they are well worth the small price we are asking.
  Why would you need a leather belt keeper? Lots of reasons. If your making your own officers waist belt you'll need at least one of the large keepers. If your making your own saber belt you'll need one, possibly 2 of the large keepers and at least 4 of the small.
If your current belt is too large and you have an excess amount of leather tucked under, then adding an extra keeper will help keep it neat looking.

LEATHER BELT KEEPER 3/4 INCH # 2254-A
ITEM # 2254-A $1.95 BUY NOW!

LEATHER BELT KEEPER 1 3/4 INCH
ITEM # 2254 $2.95 BUY NOW!


PECARD LEATHER DRESSING

  Pecard has long been known in the Civil War Relic community as the best leather dressing for restoring original civil war era leather artifacts. But there is no need to wait until your leather gear becomes hard, brittle and starts to crack before you start using pecard. Just a little Pecards rubbed onto your leather a couple of times a year will keep it soft and looking good for many a long campaign. It works great on any leather with any finish. Its great for boots and shoes too!
  For restoring antique leather goods use multiple coats of Pecard. Allow an appropriate amount of drying time (drying time depends on weather conditions) between coats.

PECARD LEATHER DRESSING # 942 $9.95
BUY NOW!



PUPPY PAW BUCKLE CENTER

  This is the attachment device for every stamped brass, lead filled belt plate before late 1863. Every militia, every state, every U.S. with the exception of the small 2 hook us belt buckle which were produced in very limited numbers. There are a few Georgia State seals with arrow type hooks but no one can agree on whether they are post war or not. This is called "puppy paws". Any how these are dug in and around Confederate camps in every state. They are not found in great numbers but they are found. Was the lead melted out of the back and then it and the brass face used for some other purpose? I know of at least one CS brass stamped buckle that was turned into a spoon. I don't think everyone should have one of these but it is a nice change from the old upside down U.S. buckle. If your looking for an authentic alternative to the common belt plate here it is.
  I also have just the brass "skins" of US and CS belt plates if you want to make your own correct puppy paw buckle. But i ain't pouring the lead. You'll have to do that.

PUPPY PAW ATTACHMENT # 2021 $4.95
BUY NOW!

U.S. BUCKLE BRASS SKIN ONLY # 2022 $3.95
BUY NOW!

C.S. BUCKLE BRASS SKIN ONLY # 2023 $3.95
BUY NOW!



ROLLER BUCKLE / LEATHER BELT


  This is a very common piece of CS equipment, The roller buckle on a leather waist belt. This buckle would have been found in every barn or leather shop North or South but it was the Confederates who turned it into a piece of military equipment.
  Our belt is made of top quality leather, it measures 57 inhces long. You can easily cut it to length with a pair of sharp scissors. The belt is one and three quarters of an inch (1 3/4) wide so it will work with any standard piece leather gear, holsters, cap pouches etc. The iron buckle has been blued, not painted so the color will not wear off, at least not for years. It is stitched onto the belt using heavy cotton string and a "harness stitch". The keeper is sewn into place. It's as good as anyones, better than most.

ROLLER BUCKLE / LEATHER BELT
ITEM #271 $24.95
BUY NOW!



GEORGIA FRAME BUCKLE ON LEATHER

  Our Georgia frame buckles are cast right from an original dug here in Middle Tn. Just outside of Fosterville in Rutherford county. From a forward picket post in front of Guys Gap, the main road leading from Murfreesboro to Shelbyville. It was occupied by confederate troops until June of 1863 but never used there after. This positively dates this piece no later than June 63.
  Many of the top buckle men in the country believe that the buckles supplied to the Army of Tennessee during this period were cast in the Dalton Ga. area but there is no "proof positive". These buckles are found in both Army of Northern Virginia camps as well as Army of Tennessee camps.

  Our Georgia frames are the gutter back style, they are sewn on smooth side out with 3 lines of stitching as often seen on originals with leather intact. The belt itself is 1 7/8 inches wide. You can order yours in lengths of 40 inches, 50 inches or 60 inches. The tongue of the belt comes to a point (bullet style) at the end. The belt has a "creased" edge that runs the entire length of the belt and it comes in black leather only.

GEORGIA FRAME BUCKLE ONLY
# 892-C $19.95 BUY NOW!

GEORGIA FRAME ON BLACK LEATHER 40 INCHES LONG
# 892 $29.95 TEMP. OUT OF STOCK.

GEORGIA FRAME ON BLACK LEATHER 50 INCHES LONG
# 892-A $34.95 BUY NOW!

GEORGIA FRAME ON BLACK LEATHER 60 INCHES LONG
# 892-B $39.95 TEMP. OUT OF STOCK.



FORKED TONGUE BUCKLE ON BLACK LEATHER

  Our forked tongue buckles are cast directly from one that was dug in Shelbyville Tn. in one of Gen. Polk’s Camps along the Duck River line. This camp was occupied from Jan. 63 until June of 1863. It was never used by Confederate troops there after. This positively dates this buckle no later than June of 1863. Many of the top buckle men in the country believe that the buckles supplied to the Army of Tennessee during this period were cast in the Dalton Georgia area but there is no "proof positive". These buckles are found in both the Army of Northern Virginia camps as well as the Army of Tennessee camps.
  Our Forked Tongue buckles are sewn on with 3 lines of stitching as often seen on originals with leather intact. The belt itself is 1 7/8 inches wide. You can order yours in lengths of 40 inches, 50 inches or 60 inches. The tongue of the belt comes to a point (bullet style) at the end. The belt has a "creased" edge that runs the entire length of the belt and it comes in black leather only.

FORKED TONGUE BUCKLE ONLY
# 893-C $19.95 BUY NOW!

FORKED TONGUE ON BLACK LEATHER 40 INCHES LONG
# 893 $29.95 TEMP. OUT OF STOCK.

FORKED TONGUE ON BLACK LEATHER 50 INCHES LONG
# 893-A $34.95 TEMP. OUT OF STOCK.

FORKED TONGUE ON BLACK LEATHER 60 INCHES LONG
# 893-B $39.95 TEMP. OUT OF STOCK.



ENLISTED MANS WAIST BELT

BUCKLE AND KEEPER SOLD SEPERATLY



  Our high quality waist belts are made from top grain leather. They are 1 7/8 inches wide, black leather with all the holes punched, ready for the buckle.
Choose your waist size below. If your not sure use a cloth tape measure to check. Be sure to put the tape measure where you intend to wear the belt. If you don't have a cloth tape measure use a piece of string and them measure the string.
  Your belt should be 6 inches longer than your waist measurement. If your waist is 32 inches then you need a waist belt 38 inches long.

CHOOSE YOUR BELT LENGTH BELOW

40 INCH LONG WAIST BELT, ITEM # 17-40      $14.95
BUY NOW!

50 INCH LONG WAIST BELT, ITEM # 17-50      $16.95
BUY NOW!

60 INCH LONG WAIST BELT, ITEM # 17-56      $19.95
BUY NOW!

If you would like your waist belt cut to a specific size click on the button below and then be sure to use the comment box of the order form to tell us what length you would like your belt cut to. THERE IS NO RETURN ON CUT BELTS.

CUT MY BELT $4.95 BUY NOW!


IF YOU WOULD LIKE FOR US TO PUT YOUR BUCKLE ON CLICK BELOW.
INSTALL 1 PIECE BUCKLE ON WAIST BELT $4.95 BUY NOW!

WE DO NOT ACCEPT RETURNS OF BELTS AFTER WE HAVE PUT BUCKLES ON THEM.

CAST BRASS BELT BUCKLES START ON PAGE 18,
CAST BRASS BUCKLES WITH AN NUMBER OF CW-88 OR LOWER FIT THIS BELT.
LEAD FILLED BUCKLES (U.S. / C.S. ETC.) ARE AT THE BOTTOM OF PAGE 23.

BRASS BELT KEEPER INSTALLED, THIS GOES ON THE END OF YOUR BELT TO HOLD IT SECURE. ITEM # 647-A $9.95 BUY NOW!



CHICOGO SCREWS

  Not everyone is familier with Chicogo screws, that's why we have all the photos above. Consider this your Chicogo Screw class 101. Photo far left, this what your belt and buckle with look like when attached with Chicogo screws. Photo center, when you pull the leather belt keeper back this what your belt and buckle will look like when attached via Chicogo Screws. Photo far right, This is what the back of your belt will look like. Now you see why they call them screws. Now I know that everyone will not approve us us using something this modern but Chicogo screws are the easiest way to affix your belt to your buckle and you can change buckles if you want with nothing but a screw driver.

CHICOGO SCREWS (PAIR)
#2578    $3.95    BUY NOW!

CSA 2 PIECE RECTANGULAR BELT BUCKLE AS SEEN IN THE PHOTOS ABOVE
CW-164     $36.95 EACH   BUY NOW!



BELT FOR RECTANGLE BUCKLES

  We offer 2 widths of waist belts for our 2 piece buckles. The model offered here is our WIDE model. It fits the 1851 style eagle belt plate seen affixed to the belt in the photo above. As well as many other rectangle style buckles. Feel free to ask us if you are not sure which buckle goes with which belt.

Our waist belt for 2 piece rectangle buckles (As shown above) is an exact copy of an original. The edges of the belt are finished with straight line decoration. The keeper (that's the small part of the 2 piece buckle) would be riveted onto the belt with 2 copper rivets, washer side up. When you look to the originals you will see this style of affixing keepers to belts is seen more often than any other. The larger part of the buckle simply slides onto the belt, past a brass adjustment hook, permenently affixed to the belt that can be placed into any of the adjustment holes on the belt. This regulates the length of the belt so you can get that "just right" fit.

  The 1851 eagle belt plate w silver wreath (as seen in photo above) is not included in the price of the belts listed below. However you may pick that option below. If you order the belt alone it will come with the all holes pre punched and the rivets needed to fasten your buckle onto your belt.

BLACK LEATHER WAIST BELT FOR RECTANGLE 2 PIECE BUCKLES,
FITS SIZE 38 INCH WAIST OR SMALLER
# 2026 $24.95 BUY NOW!

BLACK LEATHER WAIST BELT FOR RECTANGLE 2 PIECE BUCKLES,
FITS SIZE 46 INCH WAIST OR SMALLER
# 2026-A $29.95 BUY NOW!

BLACK LEATHER WAIST BELT FOR RECTANGLE 2 PIECE BUCKLES,
FITS SIZE 56 INCH WAIST OR SMALLER
# 2026-B $34.95 BUY NOW!

RIVET MY BUCKLE ON.
# 2026-D $9.95 BUY NOW!

WE DO NOT ACCEPT RETURNS OF BELTS AFTER WE HAVE SEWN OR RIVETED BUCKLES ONTO THEM.


NARROW WAIST BELT FOR 2 PIECE BUCKLES


  Our narrow belts for 2 piece buckles are made from the best leather available. They fit most Tongue & Wreath style buckles measuring 1 5/8 inches wide and we have them in several different lengths. They are fully adjustable by means of a brass adjustment hook just as the originals.

CHOOSE YOUR SIZE FROM THE LIST BELOW

WAIST BELT FOR TWO PIECE BUCKLE, BLACK LEATHER 1 5/8 INCHES WIDE.
FITS WAIST SIZE FROM 28 TO 34 #25      $22.95   BUY NOW!

WAIST BELT FOR TWO PIECE BUCKLE, BLACK LEATHER 1 5/8 INCHES WIDE.
FITS WAIST SIZE FROM 36 TO 42 #25-A      $26.95   BUY NOW!

WAIST BELT FOR TWO PIECE BUCKLE, BLACK LEATHER 1 5/8 INCHES WIDE.
FITS WAIST SIZE FROM 44 TO 50 #25-B      $26.95   BUY NOW!

WAIST BELT FOR TWO PIECE BUCKLE, BLACK LEATHER 1 5/8 INCHES WIDE.
FITS WAIST SIZE FROM 52 TO 58 #26      $29.95   BUY NOW!

RIVET MY BUCKLE ON $9.95
BUY NOW!

WE DO NOT ACCEPT RETURNS OF BELTS AFTER BUCKLES HAVE BEEN RIVETED ONTO THE BELT.

(BUCKLE NOT INCLUDED IN THE PRICE OF THE BELT.)
SEE CAST BRASS BELT BUCKLES ON PAGE 21,

BUCKLES WITH AN ORDER NUMBER OF CW-100 OR HIGHER FIT THIS TYPE BELT.



11-6-16

WEARING YOUR SASH & SABER BELT.

SASH & SABER BELT VIDEO


SABER BELT


  Our saber belt is made of top grain cow hide. It is dyed and stitched by hand. Top quality craftsmanship is always our paramount concern. It comes with all the rigging, ready to wear. It comes with the Sam Brown strap as well. All you need is the buckle. It takes a two piece buckle (not included) but if you buy one of ours we will be happy to put it on for you. Make sure you mention that when placing your order. If ordering more than one belt be sure to let us know which buckle goes on which belt. The main body of the belt is 1 5/8 inch wide. A set of Confederate style snaps are included.
If your desired waist saber belt size is not listed below please call or e mail us for the availability.

RIVET MY BUCKLE ON $9.95 BUY NOW!

WIDE OR NARROW?

  If you are ordering a saber belt without a buckle then we need to know if you want wide or narrow. A wide belt fits the 1851 style eagle buckle and similar. A narrow fits most tongue and wreath style such as a CS 2 piece. If you are ordering a belt and buckle you can just skip this part.

WIDE SABER BELT
CHOOSE NOW!

NARROW SABER BELT
CHOOSE NOW!

PLEASE MEASURE CAREFULLY.
WE DO NOT ACCEPT RETURNS OF BELTS AFTER BUCKLES HAVE BEEN RIVETED ON. Sorry, no exceptions.

  INSTRUCTIONS; Do not go by your pants size when ordering a saber belt. Saber belts are worn over your coat. Put your coat on and measure with a cloth tape where your saber belt will "ride". At the belly button is traditional. You can wear it as low as you want. However in doing so you may require an extra long Sam Brown strap. If you wear an extra long shirt you can count on it.

SABER BELT FOR A SIZE 30 INCH WAIST    #21     $74.95   BUY NOW!

SABER BELT FOR A SIZE 32 INCH WAIST    #21     $74.95   BUY NOW!

SABER BELT FOR A SIZE 34 INCH WAIST    #21     $74.95   BUY NOW!

SABER BELT FOR A SIZE 36 INCH WAIST    #21     $74.95   BUY NOW!

SABER BELT FOR A SIZE 38 INCH WAIST    #21     $74.95   BUY NOW!

SABER BELT FOR A SIZE 40 INCH WAIST    #21-B     $84.95   BUY NOW!

SABER BELT FOR A SIZE 42 INCH WAIST    #21-B     $84.95   BUY NOW!

SABER BELT FOR A SIZE 44 INCH WAIST    #21-B     $84.95   BUY NOW!

SABER BELT FOR A SIZE 46 INCH WAIST    #22     $94.95   BUY NOW!

SABER BELT FOR A SIZE 48 INCH WAIST    #22     $94.95   BUY NOW!

SABER BELT FOR A SIZE 50 INCH WAIST    #22     $94.95   BUY NOW!

SABER BELT FOR A SIZE 52 INCH WAIST    #22-B     $104.95   BUY NOW!

SABER BELT FOR A SIZE 54 INCH WAIST    #22-B     $104.95   BUY NOW!

SABER BELT FOR A SIZE 56 INCH WAIST    #22-B     $104.95   BUY NOW!

SEE SABER BELT BUCKLES ON PAGE 21




SAM BROWN STRAP FOR SABER BELTS

  Fits all waist sizes of saber belts. All the saber belts listed above already include a Sam Brown strap. We list these separately just in case you bought one somewhere else without one. You don't have to wear a saber belt for long until you see the wisdom of having a Sam Brown strap. For those of you who might not be familiar with this item it is the leather strap that goes over your shoulder and connects to the saber belt front and rear. It's job is to help distribute the weight of your belt rig and make it much more comfortable to wear. Our Sam Brown straps are 1 inch wide, black top grain cow hide and 48 inches long. They have everything needed to fasten onto almost any design saber belt.

THIS SAM BROWN STRAP FITS YOUR AVERAGE SIZE GUY, 5 FT. 8 INCHES OR SO AND ABOUT 175 POUNDS. IT ADJUST TO FIT MUCH SMALLER OR SLIGHTLY LARGER.
#22-A        $19.95
BUY NOW!

SHOULD YOU NEED A LONGER STRAP CHOOSE THIS ONE. IT FITS TALLER AND LARGER SIZES.
#22-C        $19.95
BUY NOW!

SEE SABER BELT BUCKLES ON PAGE 21



SABER BELT SNAP SWIVEL

  This is a very good copy of the pre-war or Union style originals. They are found in all theaters of the war. Often times broken and discarded. Sometimes just lost and in good shape.

SABER BELT SNAP SWIVEL #420     $6.95 EACH   TEMP. OUT OF STOCK.
(A SABER BELT REQUIRES 2)



CONFEDERATE STYLE SABER SNAP

  THIS SNAP IS VERY SIMILAR TO THE SNAPS THAT RAN THE BLOCKADE FROM ENGLAND. THERE ARE REALLY TOUGH AND SELDOM BREAK EVEN UNDER EXTREME PRESSURE. THIS SNAP DOES NOT SWIVEL.

CONFEDERATE STYLE SABER SNAP #421      $4.95 EACH   BUY NOW!



LEECH & RIGDON SABER SNAPS

  Have you ever seen these before? Not unless you own an original. They have never before been reproduced. The most famous Confederate manufacturer of hardware is without a doubt Leech & Rigdon. Better known as Memphis Novelty Works. The most prolific maker of brass goods, sabers, the best made Confederate made pistols and even drums for the duration of the war. The shifting lines caused them to relocate several times during the war but they still managed to keep the goods flowing.
  At the onset of the War, Gen. Forrest was a Memphis City Councilman. And as you all know he outfitted his troops from his own pocket or from captured goods. Is there any doubt that he would have used Memphis Novelty Works Company for all they could have supplied? Dug goods from known Forrest camps and the photographic evidence proves without question that many of the Gen. Troopers were equipped with goods from Leech and Rigdon. Our original saber snap shown in the center was dug in the same Confederate Cavalry Camp as the CS shield and oval shown above.
  The snaps are made of solid cast brass with a spring steel snap braided directly into the snap. The best design possible for long wear without breakage. The snap measures 2 3/4 inches long. It has a beautiful ornate design that is cast into the brass. The loop measures 1 inch wide so it will fit any standard saber belt. It works great as the end snap on your horse lead too.

ITEM # 984-A LEECH & RIGDON SABER SNAP $11.95 EACH BUY NOW!

ITEM # 984 LEECH & RIGDON SABER SNAPS $19.95 PER PAIR BUY NOW!



11-1-16

HOW TO INSTALL A CARTRIDGE BOX SLING.

CARTRIDGE BOX SLING VIDEO



1855 MODEL CARTRIDGE BOX

  1855 Infantry cartridge box for .58 cal muskets,
This is an excellent reproduction of the original. The 1855 model cartridge box is the most widely carried box of the war North or South. Black leather complete with an implement pouch on the front and the tins are included,
a top flap and a inner flap keeps moisture from
getting to your cartridges. Accepts a shoulder strap of will fit on your waist belt.

ITEM # 27    $49.95    BUY NOW!

US CARTRIDGE BOX PLATE FOR .58 CAL. CART. BOX # 263 $9.95 BUY NOW!

CS CARTRIDGE BOX PLATE FOR .58 CAL. CART. BOX # 261 $9.95 BUY NOW!

PUT MY CARTRIDGE BOX PLATE FOR ON $9.95 BUY NOW!

WE DO NOT ACCEPT CARTRIDGE BOX RETURNS AFTER PLATES HAVE BEEN INSTALLED.


1842 .69 cal. CARTRIDGE BOX

  This box is black leather, top quality, The tins are included. Looks just like the typical .58 cal. box but it is larger to accept 40 rounds of .69 cal. loads.

1842 .69 CAL. CARTRIDGE BOX
ITEM # 675    $54.95    TEMP. OUT OF STOCK.



CARTRIDGE BOX SLING

  Our leather Cartridge box sling is 72 inches long. Made from top grain cow hide. It measures 2 1/8 inches wide and fits all standard cartridge boxes. British Enfield, US 1855 .58 cal. models and 1842 .69 cal. boxes. This sling can be shortened to fit smaller folks with nothing more than a sharp pair of scissors and a hole punch.


CARTRIDGE BOX SLING ITEM # 19       $18.95    BUY NOW!

PUT MY CARTRIDGE BOX SLING ON MY CARTRIDGE BOX $4.95 BUY NOW!

EAGLE BREAST PLATE FOR CARTRIDGE BOX SLING #266 $9.95 BUY NOW!

PUT MY EAGLE BREAST PLATE ON MY CARTRIDGE BOX SLING. $9.95 BUY NOW!

WE DO NOT ACCEPT RETURNS OF CARTRIDGE BOX SLINGS AFTER PLATES HAVE BEEN ATTACHED.


CAP POUCH FOR MUSKET CAPS

  Black leather with fur liner exactly like the original. The fur liner helps prevent your caps from falling out should you forget to close the flap in the heat of battle.


TWO PIECE FRONT.

ITEM # 33       $18.95     BUY NOW!

 

CAP POUCH FOR MUSKET CAPS

  This cap pouch is the one piece front model. It is made of black leather. It has two belt loops and is fur lined exactly as the originals. It has a brass acorn style finial.

FUR LINER KEEPS YOUR CAPS FROM FALLING OUT IF YOU FORGET TO CLOSE THE FLAP IN THE HEAT OF BATTLE.

ITEM #32    $18.95   BUY NOW!



N.C.O. BALDRIC

  Our N.C.O. baldric (sword hanger) is made of top grain black leather. It is 2 1/8 INCHES WIDE and will accept all standard N.C.O. sabers. This baldric as well as all baldrics require a baldric style buckle. It appears no different from a breast plate but the fastening attachment is made especially for the baldric.

N.C.O. BALDRIC #20     $44.95     BUY NOW!

EAGLE BREAST PLATE/BUCKLE FOR NCO BALDRICS. A REGULAR BREAST PLATE WON'T WORK. YOU HAVE TO HAVE ONE WITH HOOKS LIKE A BUCKLE.
#20-A     $9.95   BUY NOW!

PUT MY BREAST PLATE ON MY BALDRIC $6.95 BUY NOW!

WE DO NOT ACCEPT RETURNS OF BALDRICS AFTER PLATES HAVE BEEN ATTACHED.


CYLINDER POUCH

  Our black leather Cylinder pouch fits on your waist or saber belt.  It holds two pistol cylinders, .36 or .44 cal. The pouch has a wooden block with spindles which holds each cylinder firmly in place. One cylinder pouch will let you carry two extra loaded cylinders into battle. WOW! That will be just like having a Gene Autry 50 shooter!

CYLINDER POUCH FOR REMINGTONS #35-R      $34.95    BUY NOW!

CYLINDER POUCH FOR EVERYTHING ELSE #35      $29.95    BUY NOW!




SABER KNOT

  This ties on your knuckle bow and then you wrap it around your wrist, if you drop it in a fight it wont hit the ground. Its sort of like a lanyard for your saber. Black leather 1 1/8 inch wide.

SABER KNOT #23         $14.95     BUY NOW!




OFFICERS SABER KNOT

  This officer's saber knot is made of gold bullion. It is very well made and will dress up any Officer's impression Union or Confederate.

OFFICER'S GOLD SABER KNOT ITEM # 24        $29.50       BUY NOW!




Click here to see

MORE LEATHER GOODS

on page ELEVEN of the Blockade Runner catalog!!!!

Click here to refer back to catalog INDEX page.

www.blockaderunner.com  

Phone:  931-389-6294     Fax:  931-389-0486
This site designed and created by Blockade Runner Publishing
Copyright © 2024 - No portions of this website may be redistributed in any form without expressed written permission from
Blockade Runner Inc.