Black Powder Loading And Precautions1851 NAVY COLT CASED SETBlack Powder Revolver Cased Sets by EMF Company include an authentic reproduction black powder revolver, a deluxe, red velvet-lined hardwood case, a bullet mould, and a powder flask. The bullet mould and powder flask are appropriate for the caliber of the revolver, which can be .36 or .44. One size of hardwood case fits the Colt 1851 Navy, Colt 1860 Army, and Remington 1858 Army revolvers. 1851 COLT NAVY .36 CAL. BRASS FRAME CASED SET ITEM # 2054D $ 444.95 TEMP. OUT OF STOCK. 1851 COLT NAVY .44 CAL. BRASS FRAME CASED SET ITEM # 2054A $ 444.95 TEMP. OUT OF STOCK. 1851 COLT NAVY .36 CAL. STEEL FRAME CASED SET ITEM # 2054B $ 474.95 TEMP. OUT OF STOCK. 1851 COLT NAVY .44 CAL. STEEL FRAME CASED SET ITEM # 2054C $ 474.95 TEMP. OUT OF STOCK. 1858 REMINGTON STEEL CASED SET1858 REMINGTON ARMY .44 CAL. BRASS FRAME ITEM #2055-A $464.95 TEMP. OUT OF STOCK. 1858 REMINGTON ARMY .44 CAL. STEEL FRAME ITEM #2055-B $504.95 TEMP. OUT OF STOCK. 1858 REMINGTON ARMY .44 CAL. STAINLESS STEEL FRAME ITEM #2055 $574.95 TEMP. OUT OF STOCK. 1860 COLT ARMY CASED SET1860 COLT ARMY .44 CAL. BRASS FRAME CASED SET ITEM # 2056 $464.95 TEMP. OUT OF STOCK. 1860 COLT ARMY STEEL FRAME CASED SET ITEM # 2056-A $494.95 TEMP. OUT OF STOCK. 1861 COLT NAVY .36 CAL. CASED SET1861 COLT NAVY .36 CAL. STEEL FRAME CASED SETITEM # 2057 $504.95 TEMP. OUT OF STOCK. ** CLEANING AND CARING FOR YOUR WEAPON **Now spray a clean dry patch with Balistol and swab the inside of the barrel. Now spray a light coat of Balistol on the outside of the barrel taking care to clean well around the nipple. An old tooth brush works great. With a nipple wrench unscrew the nipple. Using a nipple pick clean the inside of the nipple, oil very lightly and replace. Oil all metal surfaces. It is not necessary to remove the barrel and lock plate every time but it should be removed at least once a year, twice if you have an active season. To remove the lock plate place the hammer on half cock and remove the two lock plate screws, the plate will come right out if you wiggle the hammer. Then take a can of WD 40 and spray the crud off the inside of the lock plate. Clean with a tooth brush and spray away any remaining gunk. Wipe dry and spray with a light coat of Balistol, now just put it back together and your ready to go. If you do this before you store your gun for the winter you will have no problems come spring. If you don't use Balistol then check the gun for rust at least every 2 months. Balistol is good for 6 months. CLEANING SOLUTIONClick here to see Musket & Pistol Accessorieson page SIX in the Blockade Runner catalog!!!!Click here to refer back to catalog INDEX page. www.blockaderunner.com Phone: 931-389-6294 Fax: 931-389-0486
|